• The blue ones we got worked perfectly - thanks. We originally bought the red ones, not knowing the specifics on the rack type in our new COLO.  I knew there was a possibility they would not work.  They didn't but the blue ones worked. We do enough rack work that we will keep both bags in case we run into racks that can use the red ones. We love the product - You guys are pure genius!  My knuckles thank you 😉

    Mark Kiwiet
    Mark Kiwiet KK Worx, Inc. - Sr. Solutions Engineer
  • The Rackstuds that we have are working great, we haven't had any issues. In fact, just wanted to thank you for such an amazing product. We started using them a couple months ago and I'm not exaggerating when I say they've changed our lives (well, maybe a little, sure feels that way though).

    Such a great design, you've saved countless fingers from cage nut injuries and countless heads from someone dropping a switch on themselves while they try and install it at the top of a rack. I showed them to a few Comcast techs who came to install their gear last week, they immediately called up their manager and demanded they start buying in those in place of cage nuts.

    Landon Orr
    Landon Orr Network Operations Engineer - Qualtrics
  • I have to say that as a former installer and now inside sales, I can’t get over this product. I keep watching videos and reading articles. It’s genius. Hopefully my customers will feel the same way.

    Bobby Lester
    Bobby Lester WESCO/CSC - Communications Supply Corporation
  • I had a quick play with the biggest switch we install at some of our sites (48 port Allied Telesis AT8000S POE). It is fantastic. Took me less than a minute to install, and was painless.

    Showed my manager, and he was very impressed. Currently getting a quote from Ideal Electrical to get some more for our next project.

    Thank you for the sample pack, no more nicked, sore fingers.

    Louw Roodt
    Louw Roodt Xcrania
  • I've been using "bloody" cage nuts for over 40 years, or even worse, tapped holes. Rackstuds would have saved so much grief !! They will be my new standard, and will be spec'd into every project from here on.

    Neil @ DDL
  • Also looks like a great product and just what the market ordered! CONGRATS!!!!

    Jim Walenda
    Jim Walenda IMS Engineered Products
  • Received our samples yesterday. Brilliant!!!!!!!!!!! Clever kiwis is what I tell the Aussies around me over here. Pretty sure we are going to have some success with these.

    Just a quick note to say I love them and let’s see what we can do with these.

    Brett Lynton
    Brett Lynton Lanec Solutions, Melbourne
  • Just wondering if there are any of the new 2.7 Rackstuds available anywhere in NZ? Please don't make me use standard cage nuts.  Now I've used Rackstuds I swear by them. If there are any I can buy, beg, steal, trade, swap for beer, or name my first born after that is due in December please let me know.

    Thanks 🙂

    Bryan (soon to loose skin off his fingers, knuckles and swear lots while putting this rack together).

    Bryan Tabb
    Bryan Tabb New Zealand Technology Group
  • Just wanted to follow up that we received the additional sample you sent and tested them on our four post enclosures. The results were very impressive. We have ordered a pack of one hundred reds to start using in our NJ data center.

    Joshua Brand
    Joshua Brand NYI
  • I have received and reviewed your product with my engineering team.  We all love it.

    Scott Ware
    Scott Ware Great Lakes Case & Cabinet Co., Inc.
  • I just picked up the package and did some installs - these fit *perfectly*! I am looking forward to ditching cage nuts.

    Mark Miller
    Mark Miller NASA Goddard Space Flight Center
  • Could you please send me a couple of sample packs of the rack studs?  I’ve given all mine away (I only had 4 of the red ones). Personally I think these are the greatest things since sliced bread! Great product.  Everybody I show them to loves them.

    Don Hess
    Don Hess 3M
  • I received them and they fit perfectly!!!! I also had a Network Engineer use the Rackstuds that you sent to me and he was amazed how well they worked. Great job. I am going to show them to all the people I can here and hope they take off!

    Ian Bondy
    Ian Bondy Seattle City Light
  • Thank you, @rackstuds. I didn't slice open a single finger today with cage nuts thanks to you.

    Mike Stratton
    Mike Stratton
  • I was just given a sample pack of Rackstuds from a colleague who attended Cisco Live! and am quite impressed with the design and potential utility of your product.

    Corey Mead
    Corey Mead Blue Cross and Blue Shield of Louisiana
  • They were very well received and fit our racks (APC) just fine. We are planning to get a few packs ordered to have on hand. Thanks again!

    Barrett Williams
    Barrett Williams Venyu
  • I was really impressed with what Rackstuds has created. A product that is simple to use, looks good and is priced right.

    Brian Suhr
    Brian Suhr Data Center Zombie
  • Rackstuds are one of the best new innovative products I have seen recently. Makes installation of rackmount equipment so easy! I have sold quite a number so far and every customer has been extremely excited about their experience. Why would you use cage nuts? A brilliant concept. Well done!

    Rob Schaffer
    Rob Schaffer Rexel Holdings Australia
  • We are simply amazed at the rate at which we have seen this product take off in such a short time since we took the range on board. The product is amazing and is a real solution to mounting specific rack mount devices. As a reseller, we highly recommend getting the product in your range as it will help in opening new markets and thus giving you the opportunity to sell a broader range of products increasing your value proposition to your customer.

    Chitrang Trivedi
    Chitrang Trivedi 4Cabling
  • Holy shit, @rackstuds is arguably the best innovation in rackmount kit that I've ever seen. MUST HAVE.

    Patrick McCulley
    Patrick McCulley
  • They have worked a treat thank you. Gone are the days of awkwardly trying to hold equipment while tightening screws!

    SMC IT Department
    SMC IT Department St Margaret's College IT department
  • My @rackstuds arrived today, and I'm a fan. Added them to my toolbox. Now I want a t-shirt that says 'Rack Studs'.

    Cameron Tudball
    Cameron Tudball
  • Oh man, where have @rackstuds been all my life? These look amazing.

    Jack Kramer
    Jack Kramer
  • Oh my god, why did these take so long to invent?

    Tim Antonowicz
    Tim Antonowicz
  • OMG! Where have you been all my life? !? 😉

    John P.
    John P. GeekBeat.TV
  • RackStuds can make the trickiest part of setting up rack-mounted servers much easier - can't wait to try these out!

    Cali Lewis
    Cali Lewis GeekBeat.TV
  • Build a better cage nut and System Administrators will beat a path to your door.

    Eric Shanks
    Eric Shanks
  • WOW... Why didn't anyone think of this sooner? It's brilliant!  Thinking of all the time spent with someone crouching awkwardly supporting heavy gear while the other guy reaches over awkwardly trying to do up the top two bolts while trying to get it all to line up... no more with these suckers.

    ubergeeknz
    ubergeeknz
  • I kid you not I chipped my front tooth trying to bend a cage nut to fit. I will be ordering some ASAP.

    Xeon
    Xeon
Flick us an email

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text.